Plastic nozzles

Plastic nozzles, a great selection of random fittings of many sizes and different dimensions available at Aquamerik.

ZBD base for nozzles allows the insertion of 4 types of different nozzles. Only available with male threads: 1/8”, 1/4”, 3/8” and 1/2” NPT.

ZF series produces a V-shaped flat spray, angle can vary from 15° to 110° and can bear a pressure up to 300 PSI, depending on the model. Flow from 0.11 up to 19.2 GPM depending on the model and pressure.

ZSW and ZS series give a cone-shaped spray with an angle up to 125° and can withstand a maximal pressure of 150 PSI, depending on the model.

Flow ZS series: from 0.12 to 8.5 GPM, depending on model and pressure.
Flow ZSW series: from 0.23 to 9.3 GPM, depending on model & pressure.

ZSQ series produces a square-shaped spray with an angle up to 90° and can support a maximal pressure of 150 PSI. Flows from 0.30 to 7 GPM, depending on model and pressure.

IMAGE

More random fittings available here.